changelog.txt裏的資訊，經由 google 翻譯(德文->英文)，今年的更新資訊：
Corrected sign error in Show Data.
Sequence of ST7565 commands changed during initialization.
Without the option POWER_OFF there is no menu function "Switch off".
Menu function to output the calibration extended (Show Data).
Amended standard for connection of pulse encoder on PD1 and PD2.
Correction of the pin-outs for ATmega324 / 644 / 1284th
FAKTOR_ESR adapted for the correction of small ESR capacitance values.
Reset to uncalibrated only capacitors> 4.5uF and negative ESR.
All bitmaps for the ST7565 controller are defined in bitmaps.h.
Optimized to save bitmaps for the ST7565 controller to place.
Capacitor for compensation must be detected instead of two consecutive five times.
Overflow problem in GetESR (cap_val_nF) eliminated.
Recognition of JFET and BJT with residual stream further improved.
Waiting time before printing the help text removed.
Support for 8x8 and 8x16 character fonts for ST7565 controller, thanks to Nick L..
Contrast Adjustment for ST7565 controller as menu function.
5ms Response time after cursor Home in LCD initialization due to problem with diode symbol.
Using the internal calibration capacitor for ATmega644 / 1284th
Adaptation of the initialization of OLED displays.
External voltage measurement only with the Makefile option WITH_VEXT.
For the highest resolution for pulse encoders without latching WITH_ROTARY_SWITCH = 5th
The past of the encoder states is no longer deleted at any wait_for_key_ms call.
Also separate Up / Down buttons can be used instead of the encoder.
The automatic change of menu function after 5 seconds has been disabled.
Order of the sample frequencies changed.
Support of a rotary encoder to PD2 and PD3 for mega328 for easier menu operation.
In frequency measurement with 4-line display line 3 + 4 are used for period measurement.
Flip for ST7565 controller horizontally and vertically separated selectable.
The self-test of the calibration part is carried out only with the external capacitor,
when calibrating for the first time or the self-test with the menu function is called.
Menu function for complete self-test in transistor tester with test pins shorted
is called at free switched Menu function only of the calibration part.
Menu function for test of pulse encoders.
Support of a graphic 128x64 LCD with ST7565 controller of Wolfgang Sch.
Support of the Italian language LANG_ITALIAN.
At the frequency generating a point for 30 seconds is output as a time stamp.
Pin designations at TRIAC of GCA in G12 changed.
1.10 / 04/09/2014
Operation of the menu functions revised (timing and POWER_OFF option).
Extension of the measurement range for separate C + ESR measurement, 2UF-50mF.
Preparation to support mega324 / 644 / 1284th
Additional query in CheckPins because of false detection of TRIAC as npnp.
Separate C + ESR measurement on TP1 and TP3 selected in the menu.
Bounce suppression in wait_for_key_ms () function.
Corrections in the frequency measurement, resolution of the frequency at low frequency to 1uHz.
/1 
發表於 2014-9-13 06:03:56
樓主