|
|
技嘉型號GV-R96X128D
看了很多先進的維修經驗,小弟也修好不少東西,這次顯卡出現花屏~~~
小弟便使用熱風槍對GPU還有記憶體吹,但是花屏還是存在...
小弟便下載ATI記憶體測試軟體下去跑,果然有問題,結果如下:
-----------------------------------------
R3MEMID version 1.13, (c) Copyright ATI Technologies Inc, 2004
Log file generation enabled to .\R3MEMID.LOG ...
Reference data file (RDF) loading disabled ...
TEST RESULT SUMMARY:
====================
RV360/M11 (0x4152) detected.
128M video memory.
Test suite ran 1 of 1 times.
Checking test status array ...
[1 ] Fill : PASS
[2 ] Data line toggle (GUI) : FAIL
Error ID G0VB023
1024 x 768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDB1 34 44 45
[3 ] RW column (GUI) : FAIL
Error ID G0VB024
1024 x 768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDB1 32 33 34 35 38
[4 ] RW page (GUI) : FAIL
Error ID G0VB025
1024 x 768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDB1 32 34 35 38 39 42 43 44 ...
[5 ] RW channel (GUI) : FAIL
Error ID G0VB028
1024 x 768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDB1 32 33 34 44 45 48 49 53 ...
[6 ] Data mask : PASS
[7 ] Macro + Micro8x2 tiling read : PASS
[8 ] Macro + Micro4x4 tiling write : PASS
[9 ] Byte swap macro+micro8x2 read : FAIL
Error ID G0VC018
1024 x 768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDB1 32 33 34 35 36 38 39 40 ...
[10 ] Byte swap macro+micro4x4 write : FAIL
Error ID G0VC021
1024 x 768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDB1 32 33 34 35 36 37 38 39 ...
[11 ] Marco+Micro8x2 alignment write : PASS
[12 ] Macro+Micro4x4 alignment read : PASS
[13 ] Movblit, 4 align, T : PASS
[14 ] HOST_DATA/<f,b>/M2L : PASS
[15 ] Line slopes/dir/P/solid : PASS
Failure detected.
-----------------------------------------------------------------------
我猜測是記憶體有問題,但是是哪一顆呢? 卡上有U66~U69,U76~U79八顆記憶體...
之前熱風槍是借的,有全部吹過一次了...但還是一樣,而且記憶體是貼片式的,現在沒熱風槍是不是取不下來了呢?
之前壞掉是在win7畫面忽然變黃色,再開機就有花屏出現了,和版上大大討論?還有甚麼方法處理嗎?謝謝!!!
|
|
[複製鏈接]
/1 
發表於 2011-7-14 15:01:09
樓主
n_058|
發表於 2011-8-1 23:57:10